- Home
- Equipment
Refine by
Zk Ing Environmental Equipment & Supplies
10 equipment items found
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Gate valves are used to close the flow of bulk materials under silos, tanks, hoppers, or in pipes. They are designed as square in a double-flange design, the gate is a steel plate, which, when opened, slides out through a sealed slot outside the flow space of the valve. The material design corresponds to the purpose of use and the type of flowing substance. In the case of pneumatic and ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Filling pipe fittings provide a dust-free connection to the tanker filling hose to the silo filling pipe. In order to protect the silo against unwanted filling, it is possible to supply end caps with a lockable closure or with an end sensor to transmit the connection status information to the central control system. ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Abrasion resistant elbows are installed at the rectangular bends of the filling line to eliminate abrasion when filling abrasive loose materials. Due to the design of the knee, the stuffed material creates its own bed at the pocket, after which the filled abrasive material proceeds without further knee abrasion and the filling speed decreases further into the silo. It is a special casting ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
The mixers are designed for mixing dry bulk materials. The basis is a horizontal mixing drum, in which the mixing device rotates - plow blades connected via mixing arms with a mixing shaft mounted on both sides. Perfect mixing of loose materials is achieved by 3-dimensional mixing of the material particles. In order to mix more complicated ingredients to form local clumps while mixing, the mixer ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Screw conveyors are used for transporting and dosing dry bulk materials. The basis is a pipe or trough, inside which a conveyor spiral rotates on a shaft. They are designed with regard to model standards based on the specific performance and length requirements of the client. The material design depends on the type of transported material and its properties. In the case of longer lengths and the ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Filtration devices are designed for filtration of dust solid particles during transport and processing of dry bulk materials. The filters are equipped with an automatic filter cleaning system with full filter operation with the possibility of automatic cleaning after the filtration is finished.Depending on the type of filtered particles, the volume of filtered air and the purpose of use, they are ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Filling nozzles are designed for dust-free filling of transport tanks and flatbed trucks. bulk materials. They are designed according to the latest technological knowledge, with minimal maintenance. Electric nozzle equipment enables their motor lift, limit filling level monitoring, end position monitoring of nozzle lift and nozzle operation control from a remote ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Shut-off dampers serve to close the flow of bulk materials, liquids or gases in pipes. They are designed as butterfly, with a disc rotating around a central axis. The material as well as the type of seal correspond to the purpose of use and the type of flowing material. Thanks to the double-flange design, the inlet and outlet parts can be connected independently to the flaps.In the case of ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Silo clarification with compressed air is one of the most reliable systems facilitating the emptying of stored material from the silo. It is placed on the discharge cone near the discharge opening and its total scope is determined by the number of clarifying cushions, nozzles or plates arranged in a specified number of independent circuits. Each of these circuits is controlled by a separate ...
Manufactured by:ZK ING s.r.o. based inBystrice pod Hostýnem, CZECH REPUBLIC
Level probes are used to indicate the filling state of the silo or the hopper with bulk material. Depending on the probe type, it is possible to monitor the bulk material level either by limit (eg min., Max.) Or continuous.The probe output is evaluated in a superior control system. The type of probe is chosen with regard to the type of mass being ...